DuTCH.audio IMx.c

The DuTCH audio IM series is based around modules and because of that,  it’s possible to have a custom-controller to fit your needs. Both 1u and 2u custom units are possible. There are some physical limitations though, fitting a lot of push-buttons next to a lot of stepped attenuators is simply not easy or not even possible at all.  

When we start to design your custom product, we will charge a €75 designers' fee. This fee will be discounted from the final invoice when you order the product, but will not be refunded in case of a cancellation of the order.

These are the standard modules you can choose from.

Input modules (goldplated XLR connectors)
  • Input type A
    2 stereo inputs (1 input on a IM1.x) with bypass-able stepped active gain (+/-5.5db) on both inputs, left/right swap and polarity swap.
  • Input type B
    2 stereo inputs (1 input on a IM1.x) with bypass-able stepped active gain (+/-5.5db) on both inputs and polarity swap.
  • Input type C
    2 stereo inputs (1 input on a IM1.x) with bypass-able stepped active gain (+/-5.5db) on both inputs.
  • Input type D
    2 stereo passive inputs (1 input on a IM1.x).
Insert modules (DB25 tascam analog standard)
  • Insert type A
    2 passive inserts with order swap (1 > 2 or 2 > 1).
  • Insert type B
    2 passive inserts no order swap.
  • Insert type C
    2 passive inserts with pre/post swap functionality on insert 2 (1>2>..>7>8>out or 8>1>2>..>7>out).
  • Insert type D
    2 passive inserts with pre/post swap functionality on insert 1 (1>2>..>7>8>out or 7>1>2>..>8>out).
  • Insert type E
    2 inserts with parallel processing on the first insert (always in parallel mode) with 1 stepped switch for wet and 1 for dry (range 0 / -33dB /off). Second insert is passive
  • Insert type F
    2 inserts with mid/side with switchable stereo/MS, bypassable width control (+/-3dB) and mid or side mute.
  • Insert type G
    2 inserts with mid/side with switchable stereo/MS and mid or side mute.
  • Insert type H
    bypassable post parallel insert with wet blend (dry is always at 100%) to blend in post reverb/delay. 4x XLR's on backpanel.
  • Insert type I
    2 inserts with parallel processing with 1 stepped switch for wet and 1 for dry (range 0 / -33dB /off). First insert is passive, second insert can be passive or parallel.
  • Insert type J
    2 inserts with parallel processing with 1 stepped switch for wet and 1 for dry (range 0 / -33dB /off). First insert can be passive or parallel, second insert is passive.
  • Insert type K
    2 inserts with parallel processing with 1 stepped switch for wet and 1 for dry (range 0 / -33dB /off). Both inserts will be passive or parallel.
  • Insert type L
    2 passive inserts with swap functionality and 'master/mix mode'. This module sends the connected gear to a second DB25 when not inserted in the chain so that they can be used on send/return on something like a summing box. This module is only available for 2u units.
Output modules (goldplated XLR connectors)
  • Output type A
    2 passive outputs with bypass gain compensation on output 1 (-2dB to +8dB potmeter) and global insert bypass on both outputs.
  • Output type B
    2 passive outputs with bypassable active gain (+/- 5.5dB stepped) and global insert bypass on both outputs.
  • Output type C
    2 passive outputs.
  • Output type D
    Output with active buffer-stage (unity gain) to drive VU meters or send to a monitor-controller without disrupting the main (passive) output.

Of course it's also possible to order frontpanels in a different color, all standard RAL colors are possible at a small extra fee.
If you want to order a custom product, please contact us by filling out the contactform or by sending an email to Dit e-mailadres wordt beveiligd tegen spambots. JavaScript dient ingeschakeld te zijn om het te bekijken.

Please keep in mind that custom products will cost more then stock products.